Error Code (Send); Results Of Self-Diagnosis - Canon imageRUNNER 2270 Service Manual

Chapter 15

15.3 Error Code (SEND)

15.3.1 Results of Self-Diagnosis

Cause
There is a shortage of TCP/IP resources. Try again later.
While continuous transmission is under way or has
ended in FTP or Windows (SMB), a shortage of TCP/
IP resources has occurred, not permitting reference.
Set the IP address.
The IP address of the machine has yet to be set.
The server does not respond. Check the settings.
The settings of the selected server are not correct, or
the server has not been turned on. Or, there may be a
shortage of resources.
NetWare is in use. Try again later.
NetWare is printing using PSeve or NDSPServer, not
permitting browsing.
The layer in question at the target is too deep to browse.
The number of characters is in excess of the number
allowed.
There is no response.
The server is not ready for file transmission.
The network is cut for file transmission. (An attempt to
connect to the target of transmission may have failed,
or there is an open circuit in the middle.)
The tree name is not specified for NetWare
transmission.
An error has occurred for TCP/IP in the course of e-
mail or i-fax transmission.
15-34
T-15-7
Remedy
Wait a while; then, try again.
In user mode, set the IP address; thereafter, turn off
and then on the machine.
Wait a while; then, try again. If browsing is still not
permitted, select a different server.
Wait until NetWare finishes printing; then, try again.
The layer in question cannot be specified. Specify a
different address.
Check the target.
Check the network.
Type in the tree name.
Check the condition of the network cable and the
connector.
0008-0278