Toner Feedscrew Motor - Canon imageRUNNER 2270 Service Manual

7.12.9.3 Removing the
Toner Cartridge
Refer to procedure 7.12.3.3
7.12.9.4 Removing the
Drum Unit
Refer to procedure 7.12.2
7.12.9.5 Removing the
Developing Assembly
Refer to procedure 7.12.5
7.12.9.6 Removing the
Upper Tray
Refer to procedure 7.12.1.6
7.12.9.7 Removing the
Toner Cartridge Cover
Refer to procedure 7.12.1.7
7.12.9.8 Removing the
Pre-Exposure Lamp
Refer to procedure 7.12.1
7.12.9.9 Removing the
Left Cover
Refer to procedure 7.12.3.9
7.12.9.10 Removing the
Laser Unit
Refer to procedure 7.12.3.10
7.12.9.11 Removing the
0007-8364
Refer to procedure 7.12.3
7.12.9.12 Removing the
0007-8365
1) Remove the 2 screws [1], and
disconnect the connector [2]; then,
detach the toner sensor [3].
0007-8366
0007-8367
0007-8368
7.12.10
0007-8369
7.12.10.1 Removing the
0007-8370
Refer to procedure 7.12.1.1
7.12.10.2 Removing the
0007-8371
Refer to procedure 7.12.8
Hopper Assembly
Toner Level Sensor
F-7-78
Toner
Motor
Front Cover Unit
Waste Toner Case
Chapter 7
0007-8372
0007-8373
Feedscrew
0007-8019
0007-8026
7-49