Chapter 7
Points to Note When Attaching the
Transfer Roller
t
Be sure that the top of the holder [1] is on
he inside of the static eliminator [2].
F-7-75
Be sure that the spring [1] of the holder is
against the butting point [2].
F-7-76
7-48
7.12.8 Waste Toner Box
7.12.8.1 Removing the
Front Cover Unit
Refer to procedure 7.12.1.1
7.12.8.2 Removing the
Waste Toner Case
1) Remove the waste toner case [1].
F-7-77
7.12.9 Toner Level Sensor
7.12.9.1 Removing the
Front Cover Unit
Refer to procedure 7.12.1.1
7.12.9.2 Removing the
Waste Toner Case
Refer to procedure 7.12.8
0007-8008
0007-8015
0007-8018
0007-8025