Chapter 7
7.12 Parts Replacement
Procedure
7.12.1 Pre-Exposure Lamp
7.12.1.1 Removing the
Front Cover Unit
1) Open the front cover [1].
F-7-20
2) Remove the face cover rubber [1].
3) Remove the binding screw [2].
4) Remove the RS tightening screw [3].
5) Detach the front cover unit [4] by
moving it in the direction of the arrow.
7-30
0007-8024
7.12.1.2 Removing the
Refer to procedure 7.12.8
7.12.1.3 Removing the
Refer to procedure 7.12.3.3
7.12.1.4 Removing the
Refer to procedure 7.12.2
7.12.1.5 Removing the
Refer to procedure 7.12.5
7.12.1.6 Removing the
1) Remove the 2 screws [1], and detach the
upper tray [2].
F-7-21
Waste Toner Case
Toner Cartridge
Drum Unit
Developing Assembly
Upper Tray
0007-8031
0007-8342
0007-8343
0007-8344
0007-8345