Duplex Feed Roller 2 - Canon imageRUNNER 2270 Service Manual

Chapter 8
F-8-164
2) Free the claw [A] of the bushing [1] at
the front; then, shift it to the rear, and lift
the vertical path roller [2] to detach.
F-8-165
8-106

8.8.22 Duplex Feed Roller 2

8.8.22.1 Removing the
Right Cover (rear)
Refer to procedure 8.8.1.1
8.8.22.2 Removing the
Right Door
8.8.22.3 Removing the

Duplex Feed Roller 2

1) Free the coil spring [1] and, at the same
time, remove the E-ring [2] to pull out
the shaft [3]; then, detach the duplex
feed frame [4].
F-8-166
2) Remove the E-ring [1], and detach the
one-way gear [2].
0007-6744
0007-7361
0007-6748