2.3 Checking the Connection to the Network
2.3.1 Overview
The instructions that follow apply only when the machine is connected to a network.
If the user's network environment is based on TCP/IP, use the PING function to make sure
that the network settings are correct.
If the user's network environment is based on IPX/SPX or AppleTalk, on the other hand,
such a check need not be made.
2.3.2 Using the PING Function
1) Make the following selections in service mode: COPIER>TEST>NETWORK>PING.
2) Enter the correct IP address using the control panel keypad, and press the OK key.
3) Press the Start key.
- If successful, the indication will be 'OK'. If the attempt fails, however, 'NG' will be
indicated.
<NETWORK>
PING
0. 0. 0. 0
[1]
F-2-63
[1] Result (OK/NG)
[2] IP address input
< 1/1 >
<READY >
[2]
+/-
OK
Chapter 2
0007-5605
0007-5600
2-27