Pick-Up Unit 2 - Canon imageRUNNER 2270 Service Manual

[4]
F-8-93
8.8.1.4 Removing the
Pickup Assembly 1
1) Slide out the cassette 1/2.
2) Disconnect the 3 connectors [1]; then,
free the harness from the 2 wire saddles
[2] and the 2 clamps [3].
F-8-94
3) Remove the 4 screws [1], and take out
[2]
[1]
F-8-95
[3]

8.8.2 Pick-up Unit 2

0007-6554 8.8.2.1
Refer to procedure 8.8.1.1
8.8.2.2
Refer to procedure 8.8.1.3
8.8.2.3
1) Slide out the cassette 1/2.
2) Disconnect the connector [1], and free
the pickup unit 1 [2].
Removing the
Right Cover (rear)
Removing the
Right Cover (lower
front)
Removing the
Pickup Assembly 2
the harness from the guide; then, remove
the 4 screws [2], and detach the pickup
Chapter 8
0007-6555
0007-6556
0007-6557
8-79