Side Paper Deck - Canon imageRUNNER 2270 Service Manual

- If not as indicated, make the following
adjustments:
3) Remove the paper from the manual feed
tray.
4) Loosen the fixing screw [1] on the upper
over of the manual feed d tray.
F-13-18
5) So that the margin is as indicated, move
the top cover of the manual feed tray
back and forth.
Moving the top cover of the manual feed
tray toward the rear of the machine will
decrease the left/right image margin
along the front side.
6) Tighten fixing screw on the top cover of
the manual feed tray.
7) Put paper in the manual feed tray.
8) Make a copy using the manual feed tray
as the source of paper, and check to make
sure that the margin is as indicated.
13.1.5 Side Paper
Deck
1) Check to make sure that the 4 adjusters
[1] of the pedestal of the host machine
are in contact with the floor.
[1]
F-13-19
2) Connect the power plug of the host
machine, and turned on the power switch.
3) When the host machine has completed
its wait period, open the machine using the
paper deck as the source of paper to make
sure that the operation is normal.
A. Adjusting the Let/Right Image
Margin (1s
adjustment)
1) Make a copy using the paper deck as the
source of paper, and check to make sure
that the left/right image margin in the
image front direction is 2.5 +/-1.5 mm.
- If not as indicated, go through the
Chapter 13
0007-4911
side; mechanical
13-7