1.1 System Construction
1.1.1 Overview of the System with a Delivery Accessory
The system may include a delivery accessory that may enable any of the following three:
- if a large volume of delivery processing or multiple types of delivery processing (e.g.,
stapling, punching) is needed: delivery accessory system configuration 1
- if delivery processing is limited to stapling/punching: delivery accessory system
configuration 2
- if delivery processing is limited to 3-way delivery: delivery accessory system
configuration 3
1.1.2 Delivery Accessory System Configuration 1
The following shows a typical system configuration of this type:
Remarks:
The Expansion Delivery Kit-A1 comes as standard with the following:
Chapter 1
0006-6215
0006-6221
1-1