Waste Toner Box - Canon iR4570 Series Service Manual

F-7-162
Be sure that the spring [1] of the holder is against the
butting point [2].
F-7-163

7.12.8 Waste Toner Box

7.12.8.1 Removing the Front
Cover Unit
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Open the front cover [1].
F-7-164
2) Remove the face cover rubber [1].
3) Remove the binding screw [2].
4) Remove the RS tightening screw [3].
5) Detach the front cover unit [4] by moving it in the
direction of the arrow.
7.12.8.2 Removing the Waste
Toner Case
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the waste toner case [1].
0007-8008
Point to note after attaching the waste toner
receptacle
After attaching the waste toner receptacle, move the
waste toner full detection lever [1] up and down to
make sure that the lever is moved smoothly. Faulty
detection may be resulted if the lever is caught in
something and is not moved smoothly.
Chapter 7
F-7-165
0007-8015
F-7-166
7-55