Safety Shutdown Reason Codes - Honeywell FlexLine SmartServo 954 Service Manual

COMMISSIONING

7.3.13.2 Safety Shutdown Reason Codes

The Safety Function Status Codes listed below have detail error information in the
output's Safety Shutdown Reason entity.
Safety Function Safety Shutdown Reason Codes
Status Code
BOARD VOLTAGE MON ADC ERROR
FAILURE Communication with the FII-SIL voltage monitor failed
VOLTAGE MON POWER SUPPLY LO LIM_EXCEEDED
The power supply voltage is below the lower limit.
VOLTAGE MON POWER SUPPLY HI_LIM_EXCEEDED
The power supply voltage is above the upper limit.
VOLTAGE MON LOGIC LO LIM EXCEEDED
The internal voltage VDD1 is below the lower limit.
VOLTAGE MON LOGIC HI LIM EXCEEDED
The internal voltage VDD1 is above the upper limit.
VOLTAGE MON CAN TRANSMITTER LO LIM EXCEEDED
The internal voltage VDD3 is below the lower limit.
VOLTAGE MON CAN TRANSMITTER HI LIM EXCEEDED
The internal voltage VDD3 is above the upper limit.
HARDWARE VERSION VOLTAGE OUT OF RANGE
The FII-SIL hardware version is invalid
FUNCTION SIL OUTPUT SELF-TEST FAILURE
FAILURE The output function health diagnostics have failed.
CODE ROM ERROR
CHECKSUM The FII-SIL firmware is corrupted.
FAILURE
BOARD TEMPERATURE MON LO LIM EXCEEDED
TEMPERATURE The FII-SIL module temperature is below the lower limit
FAILURE
TEMPERATURE MON HI LIM EXCEEDED
The FII-SIL module temperature is above the upper limit
TEMPSENS SPI COMMUNICATION ERROR
Communication with the FII-SIL module temperature sensor failed.
Part No.: 4417340 Revision 1 Service Manual
954 SmartServo FlexLine
217