SERVICE TOOLS
5.1.5.1.4
5.1.5.1.5
5.1.5.1.6
36
Display Settings Screen
The
[display settings]
screen allows you to set the time-outs for the
buttons. The screen displays the following items:
Feature
After keypad timeout go to main screen
Display Test Screen
[display test]
When the
a black/blank test. HART SmartView begins drawing a rectangle of 64 x
128 pixels, filled with black pixels for a period of 1 second. After that
period, the screen is cleared using a rectangle filled with white pixels for
a period of 1 second.
Identification Screen
The
[identification]
screen (see examples in
scroll through the available FlexConn modules, using the up and down
buttons, to obtain information regarding the following:
HART SmartView (see left screen)
o the tank name
o the tank address
o customer ID
o HART SmartView
+
address
software version
+
+
software checksum
FlexConn modules (see right screen)
o board name
o board id
o instance
o software version
Service Manual
954 SmartServo FlexLine
Possible States
ON/OFF
screen is selected, the HART SmartView performs
Figure
5-5) allows you to
Part No.: 4417340 Revision 1
Default
ON