COMMISSIONING
Figure 7-32
Part No.: 4417340 Revision 1
The TAB sheet Generic gives information on the installed software
version, the board instance number and from there three commands
can be given (Refer to
FCM-TRL/2 Specific
Reset device button:All modules of the SmartLink are reset
Reset board button:Only the FCM-
Test LED's button:The TxD and RxD led's are switched on for 10
seconds. The selected FCM-TRL/2 Module is identified. This is useful
incase more than one FCM- TRL/2 Module is present.
Board Instance: If more than one FCM-
SmartLink, each FCM- TRL/2 Module needs to have a unique board
instance number. Range: 0 till 9.
Software version:Current installed software version for the FCM- TRL/2
module.
Service Manual
954 SmartServo FlexLine
"FCM-TRL/2 Specific").
Figure 7-32
TRL/2
TRL/2
module is reset
Module is present in the
171