SERVICE TOOLS
5.1.5.1.1
5.1.5.1.2
[menu]
By using the
screen of the HART SmartView (
Figure 5-3
34
Start-up Screen
The HART SmartView starts up displaying the following:
Black test (all pixels ON)
Blank test (all pixels OFF)
Honeywell logo + Software version and checksum
PV screen or the standby screen
Menu Screen
) you can view and/or modify settings, or you can send a
Figure 5-3
specific command to a sensor or a digital I/O board.
The menu screen
Service Manual
954 SmartServo FlexLine
<
MAI N
Part No.: 4417340 Revision 1