Table of Contents
Advertisement
CHAPTER
2
INSTRUCTIONS AND SAFETY MEASURES
Precautions
The following precautions must be exercised to use the Honeywell
Versatilis Signal Scout safely and effectively:
Honeywell will not provide any guarantee, if the Signal Scout is
n
disassembled.
The battery may present a potential electrostatic ignition hazard
n
when dissembled.
Improper use may lead to battery fluid leakage, excessive heat,
n
ignition, or explosion.
Honeywell will not be liable for any hazard that might be caused
n
due to negligence in handling the Signal Scout.
Care should be taken to protect this Signal Scout from impact or
n
abrasion if located in a Zone 0/Class I Div 1 environment.
It is the responsibility of the end user to verify that the Signal
n
Scout has the necessary approvals required for the intended area
of use.
Ensure that the operating environment of the Signal Scout is
n
consistent with the appropriate hazardous location's certification.
Hazardous locations
Honeywell Versatilis Signal Scout is available with IECEx, ATEX, UKCA
Ex, North America Class I Div I and CCoE approvals.
For more information, see
certifications
section.
7
Advertisement
Table of Contents
