Safety Information (En-Us-Fra) - Honeywell enCore Series Manual

2

2 Safety information (EN-US-FRA)

//Cette page est répétée en français. // This page is repeated in French. //
The device complies with the relevant safety standards. The safety and warning
notes listed here and on the device (in English or France) support proper handling.
Always observe all safety information in this manual and on the device. Also observe
the technical specifications or the data sheet. Always contact Honeywell if you have
any questions or are in doubt!
PROHIBITION
to operate the measuring device or parts involved in the measure-
l
ment with damages
operation with modified housing or unsuitable connections.
l
Installation in a place where electrostatic charges may occur on
l
non-conductive surfaces.
storage and operation at ambient conditions /temperatures outside
l
the temperature range specified on the device / data sheet.
Use in corrosive atmospheres and in potentially explosive at-
l
mospheres not specified in the approvals
The explosion protection is no longer given in these cases.
If it is found that the measuring equipment or other parts involved in the measure-
ment are damaged, the system must be put out of operation, disconnect everything
from the gas and electricity supplies and secure the parts to prevent them being
used accidentally.
NOTICE
Changes or modifications to the device
In case of unauthorized modifications, the CE declaration loses its
validity with immediate effect! A safety risk may arise!
Deviations from these specifications may only be made with the approval of Honey-
well. If the device is at the limits of its operating temperature range, consider:
CAUTION
Hot or cold surfaces
Contact can cause burns and frostbite!
In case of doubt, the device should be operated via the remote operation
panel.
GasLab Q2
Safety information (EN-US-FRA)
User Manual (N ) 16 of 315