Belts - Husqvarna R419TsX AWD Workshop Manual

9.9 Belts

9.9.1 Belt overview
Transmission
Belt 1
belt
Belt 2 Main belt
Belt 3 Equipment belt
66 - Repair instructions
1
2
Engine pulley to
transmission pul-
ley
PTO to inter-
mediate pulley
Intermediate pul-
ley to cutting
deck
9.9.2 To lubricate the belt adjuster
The belt adjuster must be lubricated regularly with a
good quality molybdenum disulphide grease.
1. Remove the lower belt cover. Refer to
the lower belt covers on page 27 .
2. Lubricate with a grease gun through the nipple at the
right side, below the lower belt pulley. Lubricate until
grease comes out of the rear side of the nipple.
3. Attach the belt cover and tighten the 5 screws.
3
To remove
914 - 003 - 28.03.2019