6. Disconnect the hydraulic pipes from below the front
transmission and attach protective plugs.
7. Remove the left footrest plate. Refer to
and install the left footrest plate on page 26
8. Disconnect the hydraulic pipe from the top of the
front transmission and attach protective plugs.
9. Remove the parking brake cable from the front
transmission.
52 - Repair instructions
10. Remove the 5 screws that hold the front
transmission and lower the front transmission.
To remove
9.5.14.2 To assemble the front transmission
Obey the instructions in
clean on page 46 .
1. Assemble the front transmission in opposite
sequence. Refer to
transmission on page 51 . Tighten the left side
bearing before the right side bearing.
2. Tighten the screws that hold the front transmission
before tighten the screws for the right side bearing.
To keep the hydraulic system
CAUTION: Hold the hydraulic connection nuts
with a wrench to prevent damage to the pipes or
elbow nipples.
To disassemble the front
914 - 003 - 28.03.2019