Husqvarna R419TsX AWD Workshop Manual page 51

5. Make sure that the clutch valves are closed.
6. Start the engine and let it operate at idle speed. Fill
the transmission oil tank again.
7. Release the parking brake and operate the front and
rearward pedals for 4 – 5 seconds, fill the
transmission oil tank again.
8. Operate the forward and rearward pedals for 4 – 5
seconds.
9. Fill the transmission oil tank if it is necessary.
10. Release the pedals.
11. Operate the forward and rearward pedals. Make
sure that the wheels start to turn immediately.
12. Move the product on the adjustment tool for wheel
speed and do a test.
13. Fill the transmission oil tank if it is necessary.
14. Attach the transmission cover.
914 - 003 - 28.03.2019
9.5.14 Transmissions
9.5.14.1 To disassemble the front transmission
Do not disassemble the tool frame.
Obey the instructions in
clean on page 46 .
Note: Oil leakage from pipes and hoses can occur
although the transmission is drained.
1. Remove the cutting deck. Refer to
2. Put support below the product. Refer to
3. Remove the front wheels. Refer to
4. Remove the front speed adjustment rod from the
5. Drain the oil.
Max
Min
To keep the hydraulic system
CAUTION: Hold the hydraulic connection nuts
with a wrench to prevent damage to the pipes or
elbow nipples.
cutting deck on page 12 .
supports below the product on page 7 .
and assemble the wheel hub on page 30
front transmission.
To remove the
To put
To disassemble
Repair instructions - 51