Drive Clutch and Bearing Kit
PL10.4.99
Phaser 6128MFP Service Manual
15. Remove the screw (silver, tap, 8mm) that secures the Feed Solenoid to the
chassis to remove the solenoid.
P/J231
1. Remove the Left Side Cover (page 8-17).
2. Release the Drive Clutch harness from the cable restraint on the Feed Drive
Assembly.
3. Disconnect the Drive Clutch connector, P/J262. Allow the relay connector to
remain with the printer side of the harness.
P/J262
Service Parts Disassembly
s6128mfp-233
s6128mfp-279
8-35