Operator Control And Display Elements; Overview Of Operating And Display Elements - Siemens SINUMERIK ONE NCU 1750 Equipment Manual

Description

4.4 Operator control and display elements

Export on an SD Card
1. Insert an SD Card formatted with the FAT or ext2/3 file system in the card slot provided at the
front of the device.
2. Boot the NCU.
3. After booting, open the "/siemens/readme-oss" directory.
The OSS information is contained in the "ReadMe_OSS.txt" file.
4. To display the file content, open the file with a text editor, e.g. the Windows "Editor"
application.
4.4 Operator control and display elements
4.4.1

Overview of operating and display elements

Open the service flap by pressing on the area labeled with "Push".
Only appropriately trained personnel may use the operating elements provided in the service
area.
NOTICE
Electrostatic discharge if there is no ground connection
If there is no ground connection or a faulty ground connection, then the electronic
components in the devices can be damaged as a result of electrostatic discharge (ESD).
• Before you open the service flap, discharge yourself at the cabinet or at the ground terminal.
34
Equipment Manual, 01/2022, A5E45627807B AE
NCU 1750