Functions On Level 4 - DURKOPP ADLER beisler 2112-5 Service Instructions Manual

Switching the sliding table on or off
If this function is disabled, the pocket facing will not be stacked at the seam
end.
To switch the sliding table on or off:
1. Press the

8.7.4 Functions on level 4

Fig. 35: Functions on level 4
Function key
F1
F2
F3
F4
F5
F6
F7
F8
To call up the special parameters level 4:
1. Press the
 The Service menu opens.
2. Press the
 The special parameters level 2 opens.
3. Press the
 The special parameters level 3 opens.
4. Press the
 The special parameters level 4 opens.
70
key.
Menu
Back to level 3
Switch vacuum on or off
Switch automatic label feed system or on off
Switch cutter left trouser component on or off
Switch cutter right trouser component on or off
Switch cutter left fly piece on or off
Sew to fixed seam end position
Call up level 5
key on the start level.
key in the Service menu.
key on special parameters level 2.
key on special parameters level 3.
Programming
Switch to level 5
Service Instructions 2112-5 - 00.0 - 02/2020