Submenu Copy Seam Numbers - DURKOPP ADLER beisler 2112-5 Service Instructions Manual

Programming
6. To confirm your input and exit the menu, press the
 The display shows the new order of the seams:
Fig. 29: Specifying the order of the seams (4)

8.4.5 Submenu Copy seam numbers

You can use this submenu to copy properties of a seam program to other
seam programs.
The existing seams of the seam program to which you transfer the proper-
ties will be overwritten completely.
To copy a seam program:
1. Press the
2. Enter the two-digit number of the seam program you wish to overwrite.
3. Press the
4. Press the
5. Pres the
6. Enter the two-digit number of the seam program you wish to copy.
 The display shows OK PLEASE WAIT.
Service Instructions 2112-5 - 00.0 - 02/2020
key.
key.
Init parameters key.
Copy seam number key.
The copying process is completed.
key.
47