Testing The Functions Of The Machine; Testing Inputs And Outputs - DURKOPP ADLER 911-210-3020-10 Operating Instructions Manual

Programming

5.13 Testing the functions of the machine

You can use the
test)
and set the stroke position.
Fig. 50: Testing the functions of the machine
Information
The
is only intended for use by Dürkopp Adler Service personnel.

5.13.1 Testing inputs and outputs

Important
The instructions only provide an overview of the test possibilities.
The tests may only be performed by qualified specialists that have re-
ceived training from Dürkopp Adler.
To test inputs and outputs:
1. In the menu item
 The
Operating Instructions 911-210-10 - 00.0 - 06/2020
Extras
menu item to check the inputs and outputs, test the sewing motor
Transportklammer (Transport clamp)
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do NOT reach into the machine during function
testing of inputs and outputs.
Extras
test) Eingänge / Ausgänge testen (Test
press the
inputs / outputs)
IO Test Seite (Page)
> Service > Multitest (Multi
Service Multitest (Multi
> >
option.
window is displayed.
function
79