Programming
8.5.3 Submenu Insertion distance length, photocell
The settings made in this menu refer to each selected seam and are in
close relation to the settings made for the seam end ( p. 53).
To set the length of the insertion distance and the photocell correction for
the seam beginning:
1. Press the
The cursor marks the value that can be changed.
2. To change the value, press the
OR
3. To input a new value, enter the desired number combination on
4. To confirm your input and exit the menu, press the
8.5.4 Submenu Photocell correction for seam end, seam
The settings made in this menu refer to each selected seam and are in
close relation to the settings made for the seam beginning ( p. 53).
To set the photocell correction for the seam end, seam length and fixed
seam end point:
1. Press the
The cursor marks the value that can be changed.
2. To change the value, press the
OR
3. To input a new value, enter the desired number combination on
4. To confirm your input and exit the menu, press the
Service Instructions 2112-5 - 00.0 - 02/2020
correction at seam beginning
key.
the numeric keypad.
length and fixed seam end point
key.
the numeric keypad.
or
arrow key.
key.
or
arrow key.
key.
53