You can order the lubricating oil from our sales offices using the following
part numbers:
Container
250 ml
1 l
2 l
5 l
18.2.1 Checking the oil level in the oil reservoir
Check the oil level in the oil reservoir used for lubricating the
machine head
Fig. 244: Lubricating (1)
(1) - Oil reservoir
(2) - MIN marking
Proper setting
The oil level must not raise above the MAX marking (3) or drop below the
MIN marking (2).
To top off the oil:
1. Swivel up the machine head ( p. 14).
2. Refill oil through the hole (4) in the inspection glass until the oil level
284
reaches the Max marking (3).
Part no.
9047 000011
9047 000012
9047 000013
9047 000014
①
(3) - MAX marking
(4) - Hole
Service Instructions 745-35-10 D - 00.0 - 10/2017
Maintenance
④
③
②