Layout Of The Program Control - DURKOPP ADLER beisler 2112-5 Service Instructions Manual

Program stop key (4)
If the key is pressed during the machine cycle, all machine movements
and the sewing process are stopped.
Arrow keys (5)
Pressing the
down in the selected menu.
Pressing the
or - if the parameter list comprises several pages - browse forward or
backward.
Slot for memory stick (6)
The memory stick is the storage medium for backup copies of all program
control data. Programs can be copied to and stored on the memory stick
and uploaded to the control again if required.
Numeric keypad (7)
All variable number values are entered using the numeric keypad.
The desired sewing programs are requested using the M key. The P key
is used to request submenus, confirm input and exit the programming
mode.

8.2 Layout of the program control

The program control is controlled using the menus listed below:
40
 
and arrow keys will move the cursor one line up or
 
and arrow keys will either mark the desired parameter
NOTICE
Property damage may occur!
Damage to machine components if the machine is not ready for
operation.
Do not enter data unless the machine is ready for operation.
• System menu
• Service menu
• Global Parameters menu
• Special Parameters menu
Programming
Service Instructions 2112-5 - 00.0 - 02/2020