Entering The Service Code; Submenu Piece Counter - DURKOPP ADLER beisler 2112-5 Service Instructions Manual

Programming
To switch to submenu level 1:
1. Press the
The submenus of the system menu can be requested using either the
arrow keys or the function keys.
Important
Always perform a reset in the system menu after altering the settings or
making changes in order to return the machine to its initial position.
To perform a reset:
1. Press the STOP key 2x.

8.4.2 Entering the service code

Entering the service code allows you to access the access-protected
submenus of the system menu.
To enter the service code:
1. Press the
2. Press the
 The submenu Service Code is called up.
3. Enter the service code 50190 on the numeric keypad.
4. Press the

8.4.3 Submenu Piece Counter

This submenu lets you view the total number of finished pieces.
The total piece counter cannot be reset.
To view the total piece counter:
1. Press the
2. Press the
 The submenu Additional Programs is called up.
3. Press the
 The submenu Piece Counter is called up.
Service Instructions 2112-5 - 00.0 - 02/2020
key.
key.
key.
key.
key.
key.
key.
The total number of finished pieces is displayed.
45