Volvo Penta TD520GE Workshop Manual page 95

Group 21
Control rod guide sleeves
999 8696
999 8696
Special tools:
Fitting tool, control rod sleeves ................... 999 8696
Standard shaft, drifts .................................. 999 2000
1. For engines 520/720/721/722, remove the plug,
then drive out the guide sleeve at the front end.
On engines 720/721/722 also drive out the guide
sleeve at the flywheel end.
2. Position the guide sleeve on the drift with the
chamfer towards the crankcase.
3. Put the fitting tool 999 8696 and the drift against
the engine block and lock it in place with a screw.
Checks and adjustments
105