Control Rod - Volvo Penta TD520GE Workshop Manual

Group 21

Control rod

Check the control rod
1. Check the control rod and replace any damaged
parts.
NOTE! The governor must always be re-set when you
have changed the control rod. A trained specialist
should perform the setting, on a governor test bench.
NOTE! With an electronic governor, the new x-
measurement must be entered into the trigger unit.
Dismantling
2. Drill out the tension pin on the guide sleeve and
remove it.
NOTE! Always renew the guide sleeve and the ten-
sion pin when you dismantle the control rod.
Checks and adjustments
103