Assembly, complete engine
54
24. Attach the gasket to the oil pump/cover with a lit-
tle grease.
25. Fit the oil pump rotor onto the crankshaft.
(It will only go in one position).
26. Fit the oil pump/cover without tightening the bolts.
IMPORTANT! Push the cover upwards and
align it with the oil sump sealing surface.
27. Tighten the oil pump/cover screws
to ................................ 21 ±2 Nm (15 ±1.5 lbf ft).
Piston complete with connecting rod
28. Fit the bearing shells into the connecting rod and
cap. Lightly oil.
Group 21