Coolant Pump - Volvo Penta TD520GE Workshop Manual

Repairing components
Group 26 Cooling System
Coolant pump, check / replace
(26211)
Depending on which coolant pump model that is
installed, follow one of the procedures below.
Modell 1:
1. Remove the coolant pump from the housing.
2. Remove the V-belt pulley.
3. Check coolant pump and sealing for leaks, re-
place the coolant pump if necessary.
4. Fit the V-belt pulley.
Tighten the bolts to .................. 21 Nm (15 lbf ft).
5. Fit the coolant pump in the housing with a new
gasket.
Model 2:
1. Loosen the coolant pump from the house.
Group 26
125