Group 21
Disassembly, complete engine
28. Remove the flywheel housing.
Use Torx sockets E20 and E14.
29. Turn the engine through 90°.
Remove the plastic plugs between every second
screw, which are a locking device for the flywheel
screws.
Loosen the screws on the flywheel, but let them
stay in place.
Use 999 8681 to block the flywheel.
30. Connect lifting eye bolts M10 (1) and lifting wire.
Remove the flywheel.
WARNING! Be careful when removing the
flywheel as it is very heavy.
31. Remove the transmission housing if this has not
been removed before.
43