Volvo Penta TD520GE Workshop Manual page 82

Checks and adjustments
92
10. Check the gudgeon pin for wear.
Gudgeon pin
diameter: ................ 42
Joining the connecting rod and piston
NOTE! The gap in the ring must be facing the top of
the piston.
11. Insert one of the circlips.
12. Put the piston onto the connecting rod. The fly-
wheel symbol on the piston and the cylindrical
pegs on the connecting rod (1) must be on the
same side.
13. Insert the other circlip in the right position.
Group 21
-0.006 -0.002
mm (1.654 " )