Volvo Penta TD520GE Workshop Manual page 68

Assembly, complete engine
78
124. Fit the crankcase vent.
NOTE! Use an 5 mm Allen key.
Oil dipstick
125. Slide on the new O-ring.
126. Fit the outlet coolant pipe with a new gasket and
sealant. Tighten the screws to ........... 21 ±2 Nm
(15.5 ±1.5 lbf ft).
Exhaust manifold
127. Fit the exhaust manifold with new gaskets.
The gasket flange should be directed towards the
cylinder head.
Tighten the exhaust manifold nuts with a torque
to ............................. 25 ±2.5 Nm (18 ±1.8 lbf ft).
NOTE! Use high temperature paste (1161035) on the
screws.
Group 21