Assembly, complete engine
52
Govenor idler gear (mechanical governor)
NOTE! Electronic governors do not have an idler gear.
16. Fit the govenor idler, complete with bearing jour-
nal.
17. Using locking compound, insert the screw and
tighten it, using thread sealer (1161053-2)
to ............................................................. 21 Nm
(15 lbf ft).
Control rod
18. Fit the control rod, complete with guide sleeve.
19. Put thread sealer (1161053-2) on the screw and
tighten to ......................... 10
Group 21
+2
+1.5
Nm (7.4
lbf ft).
0
0