Volvo Penta TD520GE Workshop Manual page 39

Group 21
Piston cooling nozzles
4. Check that the oilways are not blocked. Fit the
piston cooling nozzles in the correct position in
the engine block. Press the piston cooling noz-
zles in as far as they will go.
Cams/camshaft
5. Insert the valve tappets (lightly oiled).
6. Fit the camshaft.
NOTE! Be careful when fitting the camshaft to prevent
damaging the bearings.
7. Fit the main bearing shells into the engine block.
Assembly, complete engine
49