Group 21
Camshaft bearings
Special tools:
Dial gauge ................................................... 998 9876
Fitting tool, camshaft bearings .................... 999 8695
1. Set the internal dial gauge to 65 mm (2.56").
2. Procedure for measuring the bushes at planes 1
3. Measure the bushes, replace if necessary.
Bearings, replacing
4. Remove the bearings. They can be removed in
999 8695
and 2 in points "a" and "b" (see figure).
Inside diameter: ......... 65.00
Wear limit: ............................. 65.08 mm (2.562")
both directions.
Use tool 999 8695.
Checks and adjustments
+0.054
+0.002
mm (2.56
")
95