Assembly, complete engine
56
Oil suction pipe/oil sump
34. Fit the oil suction pipe with a new gasket.
35. Tighten the oil suction pipe to the oil pump
housing. Tighten to ............................. 21 ±2 Nm
(15 ±1.5 lbf ft).
36. Cut off the protruding gasket.
NOTE! Do not pull away protruding dried silicone.
Fill the joints in the oil sump sealing surface
with silicone (part no. 1161231).
37. Position the new gasket on the engine block.
NOTE! The gasket consists of four parts.
38. Fill the indentations in the gasket with silicon (part
no. 1161231).
Group 21