Using Hyperterminal To Access The Ctp150 Device - Juniper CTP Series Hardware Manual

To communicate with the device through the console, you must have a terminal emulation program running
on your console terminal. You can use any terminal emulation program, such as HyperTerminal. A UNIX
workstation can use the emulator TIP.
To connect a console directly to the CTP150 device:
1. Connect the RJ-45 connector to the CONSOLE port.
2. Connect the crossover adapter connector to your console's serial port.
3. You can now power on the device. See
page 80.
RELATED DOCUMENTATION
Setting Up Management Access to the CTP150 Platform | 75

Using HyperTerminal to Access the CTP150 Device | 76

Using HyperTerminal to Access the CTP150 Device
If your console uses a version of Microsoft Windows (such as Windows XP or Windows NT 4.0) that
supports the HyperTerminal application, you can access the device through HyperTerminal.
1. Click the Start button and select Programs, Accessories, Communications, and HyperTerminal.
2. In the HyperTerminal window, select HyperTerminal.
3. In the Connection Description dialog box, enter a name for your device in the Name field.
4. Select any icon to represent your terminal emulation, and click OK.
5. In the Connect To dialog box, in the Connect using field, select the appropriate COM port to use (for
example, COM1), and click OK.
6. In the COM1 Properties dialog box, select the following settings:
Bits per second: 9600
Data bits: 8
Parity: None
"Powering On and Initially Configuring the CTP150 Device" on
76