Powering On And Initially Configuring The Ctp150 Device; Before You Power On The Ctp150 Device - Juniper CTP Series Hardware Manual

Circuit to packet platform

Hide thumbs Also See for CTP Series:

Table of Contents

CHAPTER 15

Powering On and Initially Configuring the CTP150

Device

IN THIS CHAPTER

Powering On and Initially Configuring the CTP150 Device | 80

Powering Off the CTP Platform | 83

Before You Power On the CTP150 Device

Before powering on the device, make sure you complete the following tasks. See the appropriate sections

for information about these tasks.

WARNING:

you perform the installation tasks.

Installing a CTP Interface Module, Processor Module, or Clock Module on page 65

Setting Up Management Access to the CTP150 Platform on page 75

Table of Contents

Ctp150