Ctp150 Space Requirements; Ctp150 Rack Installation - Juniper CTP Series Hardware Manual

Circuit to packet platform

Hide thumbs Also See for CTP Series:

Table of Contents

Select from the following rack options:

Two-post rack—a freestanding enclosed cabinet with two mounting posts in the front

Telco-type rack—two adjacent mounting posts that you must secure to the floor or an overhead

structure

Four-post rack—a freestanding open rack, either open or closed

The rack must have at least two mounting posts.

The distance between the mounting holes in the two posts must be 18.31 in. +/-.063 in., as specified in

the EIA-310-D document.

An optional mounting kit is available for midchassis mounting. Contact your Juniper Networks sales

representative for more information.

CTP150 Space Requirements | 24

CTP150 Space Requirements

If you use an enclosed rack for the device, ensure that there is a minimum of 3 in. of clearance between

the inner side wall and the system. This clearance space ensures adequate air flow.

Table of Contents

Ctp150