Juniper CTP Series Hardware Manual page 11

The rear panel comprises the following components (see
Removable CompactFlash drive—The device must be powered off when you insert or remove the
CompactFlash card. The CTP150 platform does not provide a hard drive, nor is it required.
Removable AC power supply—Power input using a standard IEC power cord.
Fans—When the device is cool, the appliance fans spin at a slower speed to reduce noise and save energy.
As the device heats up, the fans run at a faster speed. In the event of fan failure, the hardware LED blinks
quickly and the remaining fan or fans run at full speed until the failed fan is replaced. The fans for this
model are not field replaceable units (FRUs).
Figure 2 on page 5 shows the CompactFlash drive with the cover plate removed.
Figure 2: CTP150 Chassis (Rear View)
Fans
RELATED DOCUMENTATION
Introducing CTP Series Platforms | 3
Figure 2 on page
Ejector lever Handle
Compact AC power
Flash drive cord inlet
5):
5