Product Reclamation And Recycling; Product Reclamation And Recycling Program - Juniper CTP Series Hardware Manual

CHAPTER 17

Product Reclamation and Recycling

IN THIS CHAPTER

Product Reclamation and Recycling Program | 91

Product Reclamation and Recycling Program
Juniper Networks is committed to environmentally responsible behavior. As part of this commitment, we
continually work to comply with environmental standards such as the European Union's Waste Electrical
and Electronic Equipment (WEEE) Directive and Restriction of Hazardous Substances (RoHS) Directive.
These directives and other similar regulations from countries outside the European Union regulate electronic
waste management and the reduction or elimination of specific hazardous materials in electronic products.
The WEEE Directive requires electrical and electronics manufacturers to provide mechanisms for the
recycling and reuse of their products. The RoHS Directive restricts the use of certain substances that are
commonly found in electronic products today. Restricted substances include heavy metals, including lead,
and polybrominated materials. The RoHS Directive, with some exemptions, applies to all electrical and
electronic equipment.
In accordance with Article 11(2) of Directive 2002/96/EC (WEEE), products put on the market after 13
August 2005 are marked with the following symbol or include it in their documentation: a crossed-out
wheeled waste bin with a bar beneath.
Juniper Networks provides recycling support for our equipment worldwide to comply with the WEEE
Directive. For recycling information, go to https://www.juniper.net/environmental, and indicate the type
of Juniper Networks equipment that you wish to dispose of and the country where it is currently located,
or contact your Juniper Networks account representative.
91