Juniper CTP Series Hardware Manual page 37

The console connector to the CTP150 platform is a standard RJ-45 to DB-9 adapter cable.
Figure 6 on page 35 displays the console cable pin configurations for CTP150 device. On the left is the
RJ-45 connector, and on the right is the DB-9 connector with the pin numbering indicated.
The console connections are configured to the following parameters:
Speed: 9600 bps
Data bits: 8
Stop bits: 1
Flow control: Xon/Xoff
Parity: none
Figure 6: CTP150 Console Cable Pin Configurations
Table 9 on page 35 lists console cable pinouts for the CTP150 device based on the pin configurations.
Table 9: CTP150 Series Console Cable Pinouts
CTP RJ-45 Pin
1 RTS
2 DTR
3 TXD
4 GND
5 GND
6 RXD
7 DSR
8 CTS
Console DB-9 Pin
8 CTS
6 DSR
2 RXD
5 GND
5 GND
3 TXD
4 DTR
7 RTS
35