Protecting Ctp150 Modules And Slots; Required Tools And Safety Items For Installing Ctp150 Modules - Juniper CTP Series Hardware Manual

Protecting CTP150 Modules and Slots

To prevent damage from electrostatic discharge, wear an antistatic wrist strap, and ensure proper grounding
when handling components.
To protect the modules, components, and slots when installing components, observe the following guidelines:
CAUTION:
proper grounding device. This action helps to protect the module from damage by
electrostatic discharge.
CAUTION:
leads, or solder connections.
CAUTION:
device from dust or other foreign substances and to ensure proper device cooling.
CAUTION:
an antistatic bag.
RELATED DOCUMENTATION
Safety Guidelines and Warnings for Installing CTP Modules | 41

Required Tools and Safety Items for Installing CTP150 Modules | 64

Required Tools and Safety Items for Installing CTP150 Modules

You need the following tools to install the interface module of a CTP150 device:
Phillips screwdriver
Flathead screwdriver
When handling components, use an antistatic wrist strap connected to a
Always handle a module by its edges. Do not touch the components, pins,
Be sure to cover every empty slot with a blank filler panel to protect the
Do not discard the antistatic bag. When a module is not in use, store it in
64