Maintaining Components; Required Tools For Maintaining The Ctp Platform; Storing Ctp Modules And Other Components - Juniper CTP Series Hardware Manual

CHAPTER 16

Maintaining Components

IN THIS CHAPTER

Required Tools for Maintaining the CTP Platform | 87

Storing CTP Modules and Other Components | 87

Cleaning the CTP Platform | 88
Replacing an AC Power Supply | 89
Required Tools for Maintaining the CTP Platform
You need the following tools and other items to replace platform components:
Flathead and Phillips screwdrivers
Insulated adjustable wrench
Antistatic wrist strap
Antistatic bags (or other protective packaging to hold components)
Plastic boots or other protective covers for fiber-optic connectors
RELATED DOCUMENTATION
Storing CTP Modules and Other Components
Cleaning the CTP Platform | 88
Storing CTP Modules and Other Components
Retain the packaging in which a module or other component was shipped, and use this packaging to store
the item. Modules are shipped in antistatic bags and protective packaging. Components, such as transceivers
and CompactFlash cards, are shipped in antistatic plastic containers within an antistatic padded box.
87