Additional Instructions 16.1 Machine Disposal Information; Fire Emergency; Statement Of Conformity; Hazardous Substances Emission - 3M -Matic AccuGlide 2+ 800af Instructions And Parts List

16-ADDITIONAL INSTRUCTIONS
16.1 Information for Disposal of Machine (ELV)
The machine is composed of the following materials:
- Steel structure
- Nylon rollers
- Drive belts in PVC
- Nylon pulleys
For machine disposal, follow the regulations
published in each country.
16.2 Emergency Procedures
In case of danger/fi re:
Disconnect plug of power cable from power supply.
(Figure 16-1)
IN CASE OF FIRE
Use a fi re extinguisher that is rated for electrical fi res
(Figure 16-2).

17.1 Statement of Conformity

Not Applicable.
17.2 Emission of Hazardous Substances
Nothing to report

17.3 List of Safety Features

List of components/assemblies with safety
functions
- LATCHING EMERGENCY STOP BUTTON
- Thermal cut-out relay
- Fixed guards upper drive belts
- Blade guard assemblies on both taping heads
- Important: Earth wire protection of electrical
installation.
All safety features/components must be explained
and highlighted to all operators and to the person
responsible for spare parts in order to ensure that
these components are always on hand or ordered
as a priority procedure.
ONLY USE ORIGINAL REPLACEMENT PARTS
800af-I-NA
17-ENCLOSURES / SPECIAL INFO.
17.4 Copies of Test Reports, Certifi cations (etc.)
Required by User
N/A
49
Dessin 16-1
Dessin 16-2
2010 December