3M -Matic 7000a-I Instructions And Parts List
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Food Saver
  5. 3M-Matic 7000a-I
  6. Instructions and parts list

3M -Matic 7000a-I Instructions And Parts List

Adjustable case sealer with accuglide 3 taping heads
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instructions and Parts List
3M-Matic
7000a-I / 7000a3-I Pro
Type 11700
Adjustable Case Sealer with
AccuGlide
Taping Heads
Serial #:
Important Safety Information
BEFORE INSTALLING OR OPERATING THIS EQUIPMENT
Read, understand and follow all safety and operating instructions.
Spare Parts
It is recommended you immediately order the spare parts listed in the "Spare
Parts/Service Information" section. These parts are expected to wear through
normal use, and should be kept on hand to minimize production delays.
3M-Matic
7000a-I / 7000a3-I Pro - Type 11700
™
Page i
44-0009-2164-1 / ECO# 0078045
™
3
™
For reference, record machine serial number here.
Original Instructions
Source Document for all related Manuals/Translations
International - ENG
February 2021

Advertisement

Table of Contents
loading

Related Manuals for 3M 3M-Matic 7000a-I

Summary of Contents for 3M 3M-Matic 7000a-I

  • Page 1 Instructions and Parts List 3M-Matic ™ 7000a-I / 7000a3-I Pro Type 11700 Adjustable Case Sealer with AccuGlide ™ Taping Heads Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 2 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page ii Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 3 Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch Tapes. ® If technical assistance or replacement parts are needed, call or fax the appropriate number listed below.
  • Page 4 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page iv Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 5 EU DECLARATION OF CONFORMITY Original Name and address of the manufacturer and, where applicable, his authorised representative: 3M Deutschland GmbH, Closure and Masking Systems Division Carl-Schurz-Strasse 1 D41453 Neuss, Germany This declaration of conformity is issued under the sole responsibility of the manufacturer.
  • Page 6 Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. It has been set ™ ™ ® up and tested in the factory with Scotch tapes. If any problems occur when operating ®...

  • Page 7: Table Of Contents

    4 .12 Machine Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™...
  • Page 8 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page viii Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 9 Column Repositioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 – 27 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™...
  • Page 10 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page x Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 11 Drawings and Parts Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 – End of Manual Taping Head Information Manual 2 and 3: AccuGlide 3 Taping Heads — 2 Inch or 3 Inch ™ (See Manual 2 or 3 for Table of Contents) International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page xi Source Document for all related Manuals/Translations...
  • Page 12 AccuGlide ..Trademark of 3M St. Paul, MN 55144-1000 Scotch ..Trademark of 3M St. Paul, MN 55144-1000 Drw... . Drawing Ex.

  • Page 13: Introduction

    The 7000a-I / 7000a3-I Pro Pro is manually adjustable to a wide range of box sizes (see “Specifications Section – Box Weight and Size Capacities”). The 3M-Matic case sealing machines have been designed and manufactured in compliance with the legal requirements at the date of inception.

  • Page 14: How To Read And Use The Manual

    3M Closure and Masking System Division 3M Center, Bldg. St. Paul, MN 55144-1000 (USA) Edition 2021 © 3M 2021. All rights reserved. The manufacturer reserves the right to change the product at any time without notice. Publication © 3M 2021. 44-0009-2164-1. 1.2.1 Importance of the Manual The manual is an important part of the machine;...

  • Page 15: General Information

    2.1 Data Identifying Manufacturer and Machine Identi cation Plate Data for Technical Assistance and Service Agent/Distributor or Local After Sale Service: International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 3 Source Document for all related Manuals/Translations...
  • Page 16 Contents: (1) 7000a-I / 7000a3-I Pro Pro Adjustable Case Sealer, Type 11700 (1) Tool and Spare Parts Kit (1) Instruction and Parts Manual International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 4...

  • Page 17: Safety

    International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 5 Source Document for all related Manuals/Translations...

  • Page 18: Table Of Warnings

    Never put your hands inside any part the machine is running. of the machine while it is working. Serious injury may occur (Figure 3-4). International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 6...
  • Page 19 - Always feed boxes into the machine Figure 3-8 by pushing only from the end of box. International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 7...
  • Page 20 - The operator must pay attention service this equipment. to the blades during the tape replacement. International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 8 Source Document for all related Manuals/Translations...

  • Page 21: Number Of Operators

    Tape replacement button Blade replacement Electric power Drive belt replacement disconnected Ordinary maintenance International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 9 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...

  • Page 22: Component Locations

    Lower Tape Roll Mount Switch (not shown) Assembly Figure 3-9: 7000a-I / 7000a3-I Pro Case Sealer Components (Left Front View) International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 10 Source Document for all related Manuals/Translations...

  • Page 23: Table Of Warnings And Replacement Labels

    78-8060-8481-6 Leg Height Adjustment Label (not shown) 78-8070-1329-3 78-8137-7404-5 78-8137-7406-0 3M Logo (not shown) Figure 3-10: Replacement Labels / 3M Part Numbers International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 11 Source Document for all related Manuals/Translations...
  • Page 24 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 12 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...

  • Page 25: Power Requirements

    Electrical – 230/400 Volt, 50 Hz., SCCR: 5kA The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord. Contact your 3M Representative for power requirements not listed above. 4.2 Operating Rate: Belt speed is 0.5m/s [100 F.P.M.] Actual production rate is dependent on operator’s dexterity.

  • Page 26: Machine Noise Levels

    The sum of measured value of noise plus its associated uncertainty represents an upper limit of range of values. Idling refers to machine running in rest position (no boxes). Under Load refers to machine running and box taping using adhesive tape 3M-Scotch 75mm (3”) Accuglide - Bottom Taping Head.
  • Page 27 The case sealer can accommodate most boxes within the size range listed above. Special modifications may be available for carton sizes not listed on previous page. Contact your 3M Representative for information. However, if the box length (in direction of seal) to box height ratio is .6 or less, then several boxes should be test run to assure proper machine performance.

  • Page 28: Machine Dimensions

    [1067] Weight: Crated Weight - 190 kg [425 pounds] (approximate) Uncrated Weight - 170 kg [375 pounds] (approximate) International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 16 Source Document for all related Manuals/Translations...

  • Page 29: Packed Machine Shipment And Handling

    - Do not stack anything over machine. Figure 5-4 - It is possible to stack a maximum of 2 machines (if in original packing). International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021...

  • Page 30: Unpacking

    For the disposal of the above materials, please follow the environmental directives or the law in your country. Figure 6-5 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 18 Source Document for all related Manuals/Translations...

  • Page 31: Installation

    5 - For Outer Column Repositioning- See Special Set-up Procedure (Section 11). Figure 7-3 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 19 Source Document for all related Manuals/Translations...

  • Page 32: Plastic Ties Removal

    Fig. 7-7B Compression Rollers Centering Fig. 7-7C Guide Knobs Figure 7-7 Fig. 7-7D International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 20 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...

  • Page 33: Taping Heads Completion

    Important: All connections must be made by a (as shown in Figure 7-9). quailfied electrical service technician. International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 21...

  • Page 34: Theory Of Operation

    STOP BUTTON is located on the top center of the machine Belt Direction (Figure 8-3). Figure 8-3 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 22 Source Document for all related Manuals/Translations...

  • Page 35: Controls

    On/Off Switch Figure 9-3 E-Stop 9.4 Lockable Emergency Stop Button Figure 9-4 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 23 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...

  • Page 36: Safety Devices

    • Have wire size 1.5mm dia. [AWG 16] personnel to operate and service this • Have a max. length 30.5m [100 ft] equipment. • Be properly grounded. International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 24...

  • Page 37: Set-Up And Adjustments

    6. Refer to Manual 2 or 3, “Adjustments—Changing Tape Leg Length”, for taping head setup. 7. Replace taping heads in the reverse order of disassembly. Taping Heads - Important! Turn off Electric Power International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™...
  • Page 38 (continued on next page) Note: Loosen but do not Remove Column Screws Figure 11-7 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 26 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 39 An additional adjustment can be made to reach Maximum Height. This additional height adjustment can be made by moving the Upper Assembly Crossbar up to the top holes - (Figure 11-8). Figure 11-8 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021...

  • Page 40: Operation

    1. Taping units blade guard switch on the main and disconnect 2. Latching emergency stop button electric power (Figure 12-3). 3. STOP (OFF) (O) main switch International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 28...

  • Page 41: Trouble Shooting

    Electrical disconnect Check power and electrical plug Motor not turning Evaluate problem and correct (continued on next page) International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 29 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 42 Rethread tape Applying mechanism spring Move spring hook to next has too little tension tighter hole International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 30 Source Document for all related Manuals/Translations...

  • Page 43: Safety Measures (See Section 3)

    International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 31...

  • Page 44: Drive Belt Replacement

    13. Maintenance and Repairs (continued) 13.8 Box Drive Belt Replacement Note – 3M recommends the replacement of drive belts in pairs, especially if belts are unevenly worn. Lower Drive Belts (Figure 13-1) 1. Remove and retain center plate (A) and four (4) screws. 2. Loosen, but do not remove lock nut (B).

  • Page 45: Drive Pulley Ring

    Box Drive Belt 3.5kg (7lbs) Pull Force with 25mm (1 inch) at Mid span Infeed End Discharge End Figure 13-4 Box Drive Belt Tension Adjustment International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 33 Source Document for all related Manuals/Translations...
  • Page 46 Cover Drive Belts Lock Wrench Hex Hd Infeed End Tension Screw Figure 13-6 Upper Drive International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 34 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...

  • Page 47: List Of Maintenance Operations

    ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 35 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 48 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 36 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...

  • Page 49: Additional Instructions

    Electrical tests 1 - Earth continuity 2 - Insulation resistance 3 - High voltage test Reference; EN60204-1 par. 20.2.,3.,4. International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 37 Source Document for all related Manuals/Translations...

  • Page 50: Technical Documentation And Information

    1 Phase: 230V 50Hz. E-Stop Stop POWER SUPPLY CONFIGURATION 230V 50Hz 1Ph+N+PE Start Motor connection Motor connection International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 38 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 51 16.1 Electric Diagram 3 Phase: 400V 50Hz. E-Stop Stop Start Motor connection Motor connection International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 39 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 52 The threading tool, • Figure Number part number 78-8076-4726-4 • Position contained in this kit is also available • 3M Part Number (11 Digits) as a replacement stock item. • Description Replacement Parts Ordering Information • Quantity...
  • Page 53 Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on special order. Contact 3M/Tape Dispenser Parts to confirm item availability International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™...
  • Page 54 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 42 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 55 Figure 16173/B Figure 16010 Figure 16011 Figure 16017 Frame Assemblies Figure 16014 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 43 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 56 7000a-I / 7000a3-I Pro Figure 16010 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 44 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 57 7000a-I / 7000a3-I Pro Figure 16010 Ref. No. 3M Part No. Description 16010-1 78-8137-8416-8 Support - Guide Arm 16010-2 78-8070-1537-1 Lever w/Pivot 16010-3 78-8070-1538-9 Bushing 16010-4 78-8137-8417-6 Rear Lever Edge Guides 16010-5 78-8137-8418-4 Left Guide 16010-6 78-8070-1546-2 Cap - Guide...
  • Page 58 7000a-I / 7000a3-I Pro Figure 16015 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 46 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 59 7000a-I / 7000a3-I Pro Figure 16015 Ref. No. 3M Part No. Description 16015-1 78-8137-8086-9 Support Bracket 16015-2 78-8070-1549-6 Knob VTR-B-M10 16015-3 78-8017-9074-8 Washer - Nylon 15mm 16015-4 26-1004-5510-9 Washer - Plain M10 16015-5 78-8076-4632-4 Cap - Support 16015-6 78-8076-4630-8 Plate - Roller Tube 16015-7 78-8076-4631-6 Screw - M10X35...
  • Page 60 7000a-I / 7000a3-I Pro Figure 16016 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 48 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 61 7000a-I / 7000a3-I Pro Figure 16016 Ref. No. 3M Part No. Description 16016-1 78-8017-9169-6 Nut - M18x1 - Galvanized 16016-2 78-8070-1395-4 Arm - Tape Head (Upper and Lower) 16016-3 78-8137-0998-3 Bracket - Roller Holder (Lower) 16016-4 78-8076-4519-3 Shaft - Tape Drum 2” 78-8060-8462-6 Shaft - Tape Drum 3” 16016-5 78-8098-8817-1 Leaf - Spring 2” 78-8098-8830-4 Leaf - Spring 3” 16016-6 26-1002-5753-9 Screw - Self Tapping7SPX8 16016-7 78-8060-8172-1...
  • Page 62 7000a-I / 7000a3-I Pro *8a Option *1a Option Conveyors Optional Casters Optional Figure 16011 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 50 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 63 7000a-I / 7000a3-I Pro Figure 16011 Ref. No. 3M Part No. Description 16011-1 78-8137-8034-9 Plate - Front Sliding 16011-1a 78-8137-8036-4 Plate - Front Sliding - (optional - Low Boxes) 16011-2 78-8137-6329-5 Plate - Side Sliding 16011-3 78-8137-8430-9 Machine Structure w/Nutzers 16011-4 78-8137-6287-5 Leg - Inner 16011-5 78-8137-0641-9 Pad - Foot...
  • Page 64 7000a-I / 7000a3-I Pro Figure 16022 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 52 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 65 7000a-I / 7000a3-I Pro Figure 16022 Ref. No. 3M Part No. Description 16022-1 78-8137-7906-9 Bracket - Column 16022-2 78-8010-7169-3 Screw - M6X12 Hex Hd. 16022-3 78-8137-6335-2 Sliding Column Assembly 16022-4 78-8129-6311-0 Plate 16022-5 78-8137-6348-5 Label - Column 16022-6 78-8137-8038-0 Bracket - Support Assembly 16022-7...
  • Page 66 7000a-I / 7000a3-I Pro Figure 16172/A Figure 16172/B Figure 16172/B Figure 16172 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 54 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 67 7000a-I / 7000a3-I Pro Figure 16172 Ref. No. 3M Part No. Description 16172-1 78-8076-4625-8 Screw - M5X16 16172-2 78-8137-8221-2 Rear Cover - Motor 16172-3 78-8137-8277-4 Screw - M8X20 16172-4 78-8017-9318-9 Washer - Plain 8mm 16172-5 78-8137-8431-7 Frame - Upper 16172-6 78-8137-6355-0 Knob - M5X16 Elesa DIN 464 16172-7 78-8137-8017-4 Knob - M6 Elesa B .193/25...
  • Page 68 7000a-I / 7000a3-I Pro Figure 16172/A International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 56 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 69 7000a-I / 7000a3-I Pro Figure 16172/A Ref. No. 3M Part No. Description 16172/A-1 78-8052-6718-0 Motor- 220/ 415V, 50HZ, 3-Phase 16172/A-2 78-8060-7880-0 Eyelet - Terminal / 4 Red 16172/A-3 78-8137-8277-4 Screw - M8X20 Zinc 16172/A-4 78-8017-9318-9 Washer - 8mm Plain 16172/A-5 78-8054-8982-6 Pulley - Timing 11 Teeth 16172/A-6 78-8137-8281-6 Set Screw - M5X6 16172/A-7 78-8017-9313-0 Nut - M8 Self Locking Nickel Plate...
  • Page 70 7000a-I / 7000a3-I Pro Figure 16172/B International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 58 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 71 7000a-I / 7000a3-I Pro Figure 16172/B Ref. No. 3M Part No. Description 16172/B-1 78-8137-8292-3 Screw - M6X16 16172/B-2 78-8010-7435-8 Washer - M6 Lock 16172/B-3 78-8052-6709-9 Washer - Special 16172/B-4 78-8052-6710-7 Roller - Idler 16172/B-5 78-8100-1239-9 Belt - Tensioning L/H 16172/B-6 78-8100-1238-1 Belt - Tensioning R/H 16172/B-7 78-8137-0607-0...
  • Page 72 7000a-I / 7000a3-I Pro Figure 16173/B Figure 16173/A Figure 16173 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 60 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 73 7000a-I / 7000a3-I Pro Figure 16173 Ref. No. 3M Part No. Description 16173-1 78-8137-8121-4 Screw - M6X12 Special 16173-2 78-8137-7983-8 Frame - Bottom Drive Belt w/Nutzers 16173-3 78-8137-8123-0 Screw - M5X20 16173-4 78-8070-1534-8 Stud - Side Plate 16173-5 78-8060-8488-1 Screw - Hex. Hd. M5X20 16173-6 78-8137-8105-7 Nut - M10...
  • Page 74 7000a-I / 7000a3-I Pro Figure 16173/A International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 62 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 75 7000a-I / 7000a3-I Pro Figure 16173/A Ref. No. 3M Part No. Description 16173/A-1 78-8052-6718-0 Motor - 220/415v, 50 Hz, 3 Phase 78-8100-0865-2 Motor - 200/220v, 50/60 Hz, 3 Phase 78-8052-6719-8 Motor - 260/440v, 50 Hz, 3 Phase 78-8046-8267-8 Motor - 100/110v, 50/60 Hz, 1 Phase 0.12kw 78-8046-8268-6 Motor - 220/240v, 50 Hz, 1 Phase 0.12kw 78-8076-4590-4 Motor - 220/240v, 60 Hz, 1 Phase 16173/A-2 78-8060-7880-0 Eyelet - Terminal / 4 Red 16173/A-3 78-8137-8277-4 Screw - M8X20 Zinc 16173/A-4 78-8017-9318-9 Washer - Plain 8mm 16173/A-5...
  • Page 76 7000a-I / 7000a3-I Pro Figure 16173/B International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 64 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 77 7000a-I / 7000a3-I Pro Figure 16173/B Ref. No. 3M Part No. Description 16173/B-1 78-8060-8416-2 Nut - Special M20X1 16173/B-2 78-8052-6713-1 Ring - Polyurethane 16173/B-3 78-8137-8291-5 Motor Pulley 16173/B-4 78-8070-1529-8 Support - Shaft 16173/B-5 78-8070-1530-6 Radial Ball Bearing - 6205-2RS, O .D . 52 16173/B-6 78-8054-8986-7 Sprocket - 3/8” Pitch 28 Teeth 16173/B-7...
  • Page 78 7000a-I / 7000a3-I Pro Figure 16023 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 66 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 79 7000a-I / 7000a3-I Pro Figure 16023 Ref. No. 3M Part No. Description 16023-1 78-8091-0660-8 Housing 16023-2 78-8076-4702-5 Grommet 16023-3 26-1003-7963-0 Screw - M8X16 Soc. Hd. 16023-4 78-8010-7163-6 Screw - M5X10 Hex Hd. 16023-5 78-8005-5741-1 Washer - M5 Flat 16023-6 78-8010-7417-6 Nut - M5 Hex - Steel 16023-7 78-8137-8043-0 Bracket - Cable Chain 16023-8 78-8137-7853-3...
  • Page 80 7000a-I / 7000a3-I Pro 19 20 Figure 16014 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 68 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...
  • Page 81 7000a-I / 7000a3-I Pro Figure 16014 Ref. No. 3M Part No. Description 16014-1 78-8137-8079-4 Push Button - Start/Stop Black/White 16014-2 78-8137-8132-1 Enclosure - White M22-I1Q-M22-I1-216535 16014-3 78-8133-9241-8 Cable Gland - M16X1.5 Grey 16014-4 78-8137-0606-2 Knob - Lockable 16014-5 78-8137-8296-4 Cover 16014-6 78-8137-8096-8 Screw - M5X16 16014-7 78-8137-0782-1 Spacer 16014-8 78-8094-6384-3 Clamp 16014-9 78-8076-5223-1 Circuit Breaker-Allen Bradley 1 .0 –...
  • Page 82 International - ENG 3M-Matic 7000a-I / 7000a3-I Pro - Type 11700 Original Instruction ™ February 2021 Page 70 Source Document for all related Manuals/Translations 44-0009-2164-1 / ECO# 0078045...

  • Page 83: Spare Parts / Ordering

    Instructions and Parts List 3M-Matic ™ Accuglide ™ Upper and Lower High Speed Taping Heads 2 Inch Type 10800 Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 84 International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page ii Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 85 Included with each machine is an Instructions and Parts List manual. Technical Assistance/Replacement Parts and Additional Manuals: Call 3M-Matic™ Help line. Provide the customer support coordinator with the model/ machine name, machine type, and serial number that are located on the identification plate (For example: Accuglide 3 - 2 inch - Type 10800 - Serial Number 13282).
  • Page 86 International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page iv Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 87 Replacement Parts and Service Information (continued) To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. It has been set ™ ™ ® up and tested in the factory with Scotch tapes. If any problems occur when operating ®...
  • Page 88 International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page vi Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 89 Replacement Parts and Service ......19-20 Replacement Parts Illustrations and Parts List ..21-End of Manual International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™...
  • Page 90 Buyer shall indemnify and hold Seller harmless against any claim by third parties resulting from failure to comply with the aforesaid laws and standards. AccuGlide , Scotch , and 3M-Matic are Trademarks of 3M, St. Paul, Minnesota 55144-1000 ™ ™ ™ International - ENG...

  • Page 91: Intended Use

    ® seam of regular slotted containers. These taping heads are incorporated into most standard 3M-Matic™ case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M-Matic™ case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines.
  • Page 92 International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 2 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...

  • Page 93: Taping Head Contents / How To Use Manual

    3M Closure and Masking Systems Division 3M Center, St. Paul, MN 55144-1000 (USA) Edition 2021/Copyright 3M 2021. All rights reserved The manufacturer reserves the right to change the product at any time without notice. How to use this Manual The manual is an important part of the machine; all information contained herein is intended to enable the equipment to be maintained in perfect condition and operated safely.

  • Page 94: Important Safeguards

    The blades are extremely sharp. system is running (Important Safeguards continued on next page) International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021...
  • Page 95 See "Replacement Parts Illustrations and Parts Lists" for label part numbers. Upper Taping Head Label 78-8137-3317-3 Lower Taping Head Label 78-8137-3316-5 78-8070-1335-0 Figure 1-1 Replacement Labels/3M Part Numbers International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™...

  • Page 96: Specifications

    5. Box Size Capacities: For use with center seam regular slotted containers. When upper and lower taping heads are used on “3M-Matic” case sealers, refer to the respective instruction manual specifications for box weight and size capacities. 6. Operating Rate: Conveyor speeds up to 0.5 m/s [100 feet per minute].

  • Page 97: Dimensional Drawing

    * This dimension can be reduced to 90mm [3.5 in.] when both heads are converted to 50mm [2 in.] tape leg lengths. Figure 2-1 Dimensional Drawing International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021...

  • Page 98: Installation

    Taping Head is supplied with a buffing the transportation company and also arm guard. Adjustments to guard may notify your 3M Representative. be required to install taping head into some older design case sealers. Installation Guidelines 4.

  • Page 99: Operation

    Tape Adhesive Side Tape Supply Roll Tape Drum Figure 3-2 Taping Head Components/Threading Diagram - Lower Head International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 9 Source Document for all related Manuals/Translations...

  • Page 100: Tape Loading - Upper Taping Head

    2. Lower taping head is loaded and Figure 3-3 Tape Loading/Threading threaded in same manner as upper head. International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 10...
  • Page 101 Excess tape can be cut with a scissors at applying roller. Figure 3-4 Tape Loading/Threading Figure 3-5 Tape Loading/Threading International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 11...

  • Page 102: Maintenance

    Should tape adhesive build-up occur on blade, carefully wipe clean with an oily cloth. (Maintenance continued on next page.) International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 12...

  • Page 103: Cleaning

    Figure 4-2 Roller Shaft Section View this socket after removing one screw to hold the shaft for removal of the second screw (See Figure 4-2). International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021...

  • Page 104: Adjustments

    - Never attempt to work on the taping head or load tape while the box drive system is running (adjustments continued on next page.) International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021...

  • Page 105: Applying Mechanism Spring

    Figure 5-5 One-Way Tension Roller - Never attempt to work on the taping head or load tape while the box (Adjustments continued on next page.) International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021...

  • Page 106: Tape Leg Length

    The blades are extremely sharp. system is running International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021...

  • Page 107: Troubleshooting Guide

    If not, press bearing further into roller or replace roller. International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021...
  • Page 108 Centering guides not centered Adjust centering guides Box flaps not of equal length Check box specifications International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 18 Source Document for all related Manuals/Translations...

  • Page 109: Spare Parts/Service Information

    Spring – Torsion Replacement Parts and Service Refer to the first page of this instruction manual “Replacement Parts and Service Information". International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021...
  • Page 110 International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 20 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...

  • Page 111: Replacement Parts Illustrations And Parts List

    Information" for replacement parts ordering information. Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confirm item availability. International - ENG 3M-Matic...
  • Page 112 International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 22 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 113 Figure 10922 Figure 10919 Figure 10921 Figure 10920 Tape Head - AccuGlide ™ 3 - 2 inch International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 23 Source Document for all related Manuals/Translations...
  • Page 114 AccuGlide 3 - 2" ™ Figure 10925 – Upper Head International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 24 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 115 AccuGlide 3 - 2" Figure 10925 – 2" Upper Head Ref. No. 3M Part No. Description 10925-1 78-8137-3294-4 Frame – Tape Mount Upper Assembly 10925-2 78-8137-3295-1 Frame – Front Upper Assembly 10925-3 78-8068-4143-9 Guide – #1 10925-4 78-8068-4144-7 Guide – #2...
  • Page 116 AccuGlide 3 - 2" ™ Figure 10922 – Upper and Lower Heads International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 26 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 117 AccuGlide 3 - 2" Figure 10922 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10922-1 78-8133-9509-8 Applying Arm #1 10922-2 78-8133-9510-6 Applying Arm #2 10922-3 78-8070-1221-2 Plate – Tape 10922-4 78-8070-1309-5 Shaft Roller 10922-5 78-8070-1367-3 Roller – Knurled Assembly...
  • Page 118 AccuGlide 3 - 2" ™ Figure 10919 – Upper Head International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 28 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 119 AccuGlide 3 - 2" ™ Figure 10919 – 2" Upper Head Ref. No. 3M Part No. Description 10919-1 78-8137-3300-9 Buffing Arm – Sub Assembly 10919-2 78-8137-3301-7 Buffing Arm – Sub Assembly 10919-3 78-8052-6575-4 Shaft – Roller 10919-4 78-8137-1398-5 Roller - Buffing Assembly 10919-5 78-8070-1220-4 Spacer – Spring 10919-6 78-8052-6580-4 Spacer 10919-7 26-1003-5829-5 Screw –...
  • Page 120 3 - 2" ™ Figure 10923 Upper and Lower Heads Figure 10923 – Upper and Lower Heads International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 30 Source Document for all related Manuals/Translations...
  • Page 121 AccuGlide 3 - 2" ™ Figure 10923 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10923-1 78-8137-3302-5 Link – Assembly 10923-3 78-8137-3304-1 Shaft – Pivot, Buffing 10923-4 78-8017-9082-1 Bearing – Special 30 mm 10923-5 78-8017-9106-8 Screw – Bearing Shoulder...
  • Page 122 AccuGlide 3 - 2" ™ Figure 10921 – Upper and Lower Heads International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 32 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 123 AccuGlide 3 - 2" ™ Figure 10921 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10921-1 78-8137-3307-4 Frame – Cut-Off Weldment 10921-2 78-8017-9173-8 Blade – 65 mm/2.56 Inch 10921-3 26-1003-8596-7 Screw - Hex Hd M5 x 8 w/ Ext. Tooth Lockwasher...
  • Page 124 AccuGlide 3 - 2" ™ Figure 10401 – Upper and Lower Heads International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 34 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 125 AccuGlide 3 - 2" ™ Figure 10401 – 2" Latch Upper and Lower Heads Ref. No. 3M Part No. Description 10401-1 78-8070-1395-4 Bracket – Bushing Assembly 10401-2 78-8076-4519-3 Shaft – Tape Drum, 50mm 10401-3 78-8017-9169-6 Nut – M18 x 1...
  • Page 126 AccuGlide 3 - 2" ™ Figure 10924 – Lower Head International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 36 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 127 AccuGlide 3 - 2" ™ Figure 10924 – 2" Lower Head Ref. No. 3M Part No. Description 10924-1 78-8137-3296-9 Frame – Tape Mount Lower Assembly 10924-2 78-8137-3297-7 Frame – Front Lower Assembly 10924-3 78-8068-4144-7 Guide – #2 10924-4 78-8068-4143-9 Guide – #1...
  • Page 128 AccuGlide 3 - 2" ™ Figure 10920 – Lower Head International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 38 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 129 AccuGlide 3 - 2" ™ Figure 10920– Lower Head Ref. No. 3M Part No. Description 10920-1 78-8137-3300-9 Buffing Arm – Sub Assembly 10920-2 78-8137-3301-7 Buffing Arm – Sub Assembly 10920-3 78-8052-6575-4 Shaft – Roller 10920-4 78-8137-1398-5 Roller - Buffing Assembly 10920-5 78-8070-1220-4 Spacer – Spring 10920-6 78-8052-6580-4 Spacer 10920-7 26-1003-5829-5 Screw – Hex Hd, M6 x 12...
  • Page 130 International - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 Original Instructions ™ February 2021 Page 40 Source Document for all related Manuals/Translations 44-0009-2070-0 / ECO#0078483...
  • Page 131 Instructions and Parts List 3M-Matic ™ Accuglide ™ Type 10800 Upper and Lower High Speed Taping Heads 3 Inch Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 132 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page ii Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 133 Included with each machine is an Instructions and Parts List Manual. Technical Assistance/Replacement Parts and Additional Manuals: Call the 3M-Matic™ Help line. Provide the customer support coordinator with the model/ machine name, machine type, and serial number that are located on the identification plate (For example: Model - Accuglide 3 High Speed 3”...
  • Page 134 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page iv Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 135 Replacement Parts and Service Information (continued) To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. It has been set ™ ™ ® up and tested in the factory with Scotch tapes. If any problems occur when operating ®...
  • Page 136 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page vi Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 137 Replacement Parts and Service ......19-20 Replacement Parts Illustrations and Parts List ..21-End of Manual International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™...
  • Page 138 Buyer shall indemnify and hold Seller harmless against any claim by third parties resulting from failure to comply with the aforesaid laws and standards. International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions...

  • Page 139: Intended Use

    ® seam of regular slotted containers. These taping heads are incorporated into most standard 3M-Matic™ case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M-Matic™ case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines.
  • Page 140 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 2 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 141 (ELV), a glossary with a definition of symbols, plus a parts list of the 3M-Matic™ Accugllide 3 (3 inch) 3M Closure and Masking Systems Division 3M Center St.

  • Page 142: Important Safeguards

    The blades are extremely sharp. system is running (Important Safeguards continued on next page) International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 4...
  • Page 143 See "Replacement Parts Illustrations and Parts Lists" for label part numbers. Upper Taping Head Label 78-8137-3317-3 Lower Taping Head Label 78-8137-3316-5 78-8070-1335-0 Figure 1-1 Replacement Labels/3M Part Numbers International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™...

  • Page 144: Specifications

    90mm [3.5 inches] (with optional 2 inch leg length) Case Sealer Width – 150mm [6 inches] When upper and lower taping heads are used on “3M-Matic” case sealers, refer to the respective instruction manual specifications for box weight and size capacities.

  • Page 145: Dimensional Drawing

    * This dimension can be reduced to 90mm [3.5 in.] when both heads are converted to 50mm [2 in.] tape leg lengths. Figure 2-1 Dimensional Drawing International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021...

  • Page 146: Installation

    Taping Head is supplied with a buffing the transportation company and also arm guard. Adjustments to guard may notify your 3M Representative. be required to install taping head into some older design case sealers. Installation Guidelines 4.

  • Page 147: Operation

    Tension Roller Tape Adhesive Side Tape Supply Roll Tape Drum Figure 3-2 Taping Head Components/Threading Diagram - Lower Head (Left Side View) International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 9...

  • Page 148: Tape Loading - Upper Taping Head

    2. Lower taping head is loaded and Figure 3-3 Tape Loading/Threading threaded in same manner as upper head. International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 10...
  • Page 149 Excess tape can be cut with a scissors at applying roller. Figure 3-4 Tape Loading/Threading Figure 3-5 Tape Loading/Threading International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 11 Source Document for all related Manuals/Translations...

  • Page 150: Maintenance

    Silicone. Should tape adhesive build-up occur on blade, carefully wipe clean with an oily cloth. (Maintenance continued on next page.) International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 12 Source Document for all related Manuals/Translations...

  • Page 151: Cleaning

    Insert a 4mm hex key wrench into this socket after removing one screw to hold the shaft for removal of the second screw. See Figure 4-2. International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 13...

  • Page 152: Adjustments

    - Never attempt to work on the taping head or load tape while the box drive system is running (adjustments continued on next page.) International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021...

  • Page 153: Applying Mechanism Spring

    - Never attempt to work on the taping Figure 5-5 One-Way Tension Roller head or load tape while the box drive system is running (Adjustments continued on next page.) International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 15...

  • Page 154: Tape Leg Length

    The blades are extremely sharp. system is running International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 16...

  • Page 155: Troubleshooting Guide

    If not, press bearing further into roller or replace roller. International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 17...
  • Page 156 Centering guides not centered Adjust centering guides Box flaps not of equal length Check box specifications International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 18 Source Document for all related Manuals/Translations...

  • Page 157: Spare Parts/Service Information

    78-8113-7030-9 Spring – Torsion Replacement Parts and Service Refer to the first page of this instruction manual “Replacement Parts and Service Information". International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 19...
  • Page 158 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 20 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 159 Information" for replacement parts ordering information. Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confirm item availability. International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™...
  • Page 160 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 22 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 161 10929 Figure 10926 (Upper) Figure 10928 Figure 10927 (Lower) Assemblies - AccuGlide ™ 3 - 3 inch International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 23 Source Document for all related Manuals/Translations...
  • Page 162 AccuGlide 3 - 3” ™ Figure 10932 – Upper Head International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 24 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 163 AccuGlide 3 - 3” ™ Figure 10932 – Upper Head Ref. No. 3M Part No. Description 10932-1 78-8137-3294-4 Frame – Tape Mount Upper Assembly 10932-2 78-8137-3295-1 Frame – Front Upper Assembly 10932-3 78-8068-4143-9 Guide – #1 10932-4 78-8068-4144-7 Guide – #2...
  • Page 164 AccuGlide 3 - 3” ™ Figure 10929 – Upper and Lower Heads International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 26 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 165 AccuGlide 3 - 3” ™ Figure 10929 – Upper and Lower Heads Ref. No. 3M Part No. Description 10929-1 78-8133-9520-5 Arm – Applying, R/H 10929-2 78-8133-9521-3 Arm – Applying, L/H 10929-3 78-8070-1292-3 Plate – Back-Up 10929-4 78-8076-4736-3 Shaft Roller 10929-5 78-8076-4737-1 Roller Assembly –...
  • Page 166 AccuGlide 3 - 3” ™ Figure 10926 – Upper Head International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 28 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 167 AccuGlide 3 - 3” ™ Figure 10926 – Upper Head Ref. No. 3M Part No. Description 10926-1 78-8137-3300-9 Buffing Arm – Sub Assembly 10926-2 78-8137-3301-7 Buffing Arm – Sub Assembly 10926-3 78-8091-0799-4 Shaft – 10 x 85, W/Hexagon 10926-4 78-8137-1397-7 Roller – Buffing Assembly 10926-5 78-8076-4739-7 Spacer – Spring 10926-6 78-8052-6580-4...
  • Page 168 AccuGlide 3 - 3” ™ Figure 10930 – Upper and Lower Heads International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 30 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 169 AccuGlide 3 - 3” ™ Figure 10930 – Upper and Lower Heads Ref. No. 3M Part No. Description 10930-1 78-8137-3302-5 Link – R/H Assembly 10930-3 78-8137-3314-0 Shaft – Pivot, Buffing 10930-4 78-8017-9082-1 Bearing – Special 30 mm 10930-5 78-8017-9106-8 Screw – Bearing Shoulder...
  • Page 170 AccuGlide 3 - 3” ™ Figure 10928 – Upper and Lower Heads International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 32 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 171 AccuGlide 3 - 3” ™ Figure 10928 – 3" Upper and Lower Heads Ref. No. 3M Part No. Description 10928-1 78-8137-7995-2 Frame – Cut-Off 10928-2 78-8028-7899-7 Knife – 89 mm/3.5 Inch 10928-3 26-1002-5817-2 Screw – Hex Hd, M5 x 8 10928-4 78-8076-4741-3 Knife Guard Assembly –...
  • Page 172 AccuGlide 3 - 3” ™ Figure 10402 – Upper and Lower Heads International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 34 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 173 AccuGlide 3 - 3” ™ Figure 10402 – 3" Latch Upper and Lower Heads Ref. No. 3M Part No. Description 10402-1 78-8070-1395-4 Bracket – Bushing Assembly 10402-2 78-8060-8462-6 Shaft – Tape Drum, 3 Inch Head 10402-3 78-8017-9169-6 Nut – M18 x 1...
  • Page 174 AccuGlide 3 - 3” ™ 17 19 Figure 10931 – Lower Head International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 36 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 175 AccuGlide 3 - 3” ™ Figure 10931 – Lower Head Ref. No. 3M Part No. Description 10931-1 78-8137-3296-9 Frame – Tape Mount Lower Assembly 10931-2 78-8137-3297-7 Frame – Front Lower Assembly 10931-3 78-8068-4144-7 Guide – #2 10931-4 78-8068-4143-9 Guide – #1...
  • Page 176 AccuGlide 3 - 3” ™ Figure 10927 – Lower Head International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 38 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 177 AccuGlide 3 - 3” ™ Figure 10927 – Lower Head Ref. No. 3M Part No. Description 10927-1 78-8137-3300-9 Buffing Arm – Sub Assembly 10927-2 78-8137-3301-7 Buffing Arm – Sub Assembly 10927-3 78-8091-0799-4 Shaft – 10 x 85, W/Hexagon 10927-4 78-8137-1397-7 Roller – Buffing 10927-5 78-8076-4739-7 Spacer – Spring 10927-6 78-8052-6580-4...
  • Page 178 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 40 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 179 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 41 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...
  • Page 180 International - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ Original Instructions February 2021 Page 42 Source Document for all related Manuals/Translations 44-0009-2071-8 / ECO# 0078045...

This manual is also suitable for:

3m-matic 7000a3-i pro11700

Table of Contents