Operator's Required Skill Levels - 3M -Matic AccuGlide 2+ 800af Instructions And Parts List

3-SAFETY (continued)
3.11 Operator's Skill Levels Required to Perform
the Main Operations on the Machine
The Table shows the minimum operator's skill for
each machine operation.
Important: The factory manager must ensure that
the operator has been properly trained on all the
machine functions before starting work.
Skill 1: Machine Operator
This operator is trained to use the machine with the
machine controls, to feed cases into the machine,
make adjustments for different case sizes, to change
the tape and to start, stop and restart production.
Skill 2: Mechanical Maintenance Technician
This operator is trained to use the machine as the
MACHINE OPERATOR and in addition is able to:
• Work with the safety protection disconnected
• Check and adjust mechanical parts
• Carry out machine maintenance operations/repairs
He is not allowed to work on live electrical components
Operator's Skill Levels Required to Perform the Main Operations on Machine
Operation
Machine installation and setup
Adjusting box size
Tape replacement
Blade replacement
Drive belt replacement
Ordinary maintenance
Extraordinary mechanical
maintenance
Extraordinary electrical
maintenance
800af-I-NA
Skill 2a: Electrical Maintenance Technician
This operator is trained to use the machine as the
MACHINE OPERATOR and in addition is able to:
• Work with the safety protection disconnected
• Check and adjust mechanical parts
• Carry out machine maintenance operations / re-
pairs / adjustments / repair electrical components
He is allowed to work on live electrical panels,
connector blocks, control equipment, etc.
Skill 3: Specialist from the Manufacturer
Skilled operator sent by the manufacturer or its
agent to perform complex repairs or modifi cations
(on agreement with the customer).
•
To reduce the risk associated with
mechanical and electrical hazards:
−
Allow only properly trained and qualifi ed
personnel to operate and service this machine
Machine Status
Running with safety
protections disabled
Stopped by pressing the
EMERGENCY STOP
button
Stopped by pressing the
EMERGENCY STOP
button
Electric power
disconnected
Electric power
disconnected
Electric power
disconnected
Running with safety
protections disabled
Running with safety
protections disabled
9
WARNING
Required
Number of
Operator
Operators
Skill
2 and 2a 2
1 1
1 1
2 1
2 1
2 1
3 1
2a 1
2010 December